NO |
Data |
Parameter |
1 |
Load capacity |
320kg |
2 |
Extend platform load |
113kg |
3 |
Max worker |
2 man |
Platform height |
6000mm |
|
5 |
Working height |
8000mm |
6 |
Machine length |
2500mm |
7 |
Machine width |
1150mm |
8 |
Machine closed height |
1060mm |
9 |
Platform size |
2300*1150mm |
10 |
Extend platform size |
900mm |
11 |
Min ground clearance (folding) |
100mm |
12 |
Min ground clearance(rising) |
19mm |
13 |
Max climbing capacity |
25% |
14 |
Min turn radius |
2330mm |
15 |
Speed of up/down |
30/38sec |
16E |
wheelbase |
1870mm |
17 |
Drive speed(folding) |
4.0km/h |
18 |
Drive speed(rising) |
0.8km/h |
19 |
motor |
24v/3kw |
20 |
Battery |
4*6v/210Ah |
21 |
Charge |
24V/25A |
22 |
Max working angle |
2-3° |
23 |
Wheels size |
406x mm |
24 |
Weight |
2100kg |
v
Brief introduction
1.Scissor hydraulic lift is the professional high-altitude operation equipment.
2. Its scissor mechanical structure makes the lifting platform lift more stably.Wide working platform and large loading capacity can make the work scope bigger.It’s suitable for several people working together.
3.Lifting height: 4m ,6m, 8m,10m , the max height of the scissor lift is 20m.
4. Loading capacity: 300kg,500kg,800kg,1000kg and so on. The Max capacity could be 7000kg.
Control system
1.Manual control and electric control
2.Electric control: There are two control systems(optional). One is hand button, which may be placed in any position on the table rail for the convenience of operation. The other is fixed on the electric-control box, which is supported with emergency stop button for prevention of any accident.
Power
1.Electricity or diesel .local power available at the working sites(110V,220V,380V,415V),diesel engines and generators.
2. It can be equipped with manual hydraulic device,so when there is no power at the occsions or the power supply goes out,the lift can still work normally
Safety
1.In special circumstance, the scissor lift will use explosion-proof electric equipment
2.The platform is equipped with antiskid plate to prevent slipping, it is enough safe when works on the platform.
3.The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity
4.The scissor lift is equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position
5.The platform is equipped with antiskid plate to prevent slipping, it is enough safe when it works
metal structure using electrophoresis, and strong ability to rust and corrosion
Small turning radius: tire turning radius of 2.33m, inside turning radius of 0m
carrying capacity: the maximum load capacity of 320kg, extended platform carrying up to 120kg
Adequate power: using imported American Trojan batteries, four series, the battery capacity of 225Ah, more than eight hours of normal use
Advanced technology: US DeltaTech control systems, fault diagnosis technology, optional crash sensor device
High reliability: the key components imported, mainly electrical components waterproof to IP65
Security: level switch with optional load cell, ensure equipment and personnel safety
Easy maintenance: Double revolving door structure, easy maintenance
Energy saving: low noise, no pollution, to achieve energy saving and environmental protection standards
Note:Hydraulic motor and Hydraulic break system from UAS WHITE
aerial work platform lift can overhang operation ,can overcome some obstacles or in a point lifting for more point work .12m electric powered aerial working platform / scissor lift can rotate 360 degrees ,load capacity big, available to two people for working at the same time and carry some tools; mobile flexible ,transfer work place convenient ,appearance beautiful.
FDGBGDGD
aerial work platform lift are widely used in highways, boat yards shopping walls, stadiums, dock, station, marketplaces, gymnasiums and residential property, 12m electric powered aerial working platform / scissor lift workshop,residential property, mining workshops and any other isometric maintenance operation of complex high-altitude construction and other large range homework place.
HFDJHBVFD
Mainly used to installing, repairing and cleaning high aerial equipment,power equipment, overhead pipeline and so on.aerial work platform lift is an ideal equipment for guaranteeing working safe,improving working efficiency and making aerial 12m electric powered aerial working platform / scissor lift working, more convenient and quick.