Whheelchair Disabled Lift Platform
Product Description• Guiding system uses “H” steel with trolley and safeties.• Tower support is a unique steel structure for strength and rigidity.
• Platform size 1200mm(L)x1000mm(W).
• Powder-painting steel.
• Manual down valve on the motor.
• Control device: one on the platform, another installed on the wall nearby.
• Emergency stop: lifting and lowering process can be stopped immediately.
• Safety lock: use the key lock the platform when it is out of control.
• A small ramp on the entrance side, make access easier.Choice
• Automatic ramp which can be upwarp after lifting up.
• Remote controller.
• DC battery drive.
• Guard panel&drive cabinet(framework): covered stainless steel.
• Movable model: with two small wheels, can be move around.
Platform size |
1200mm(L)* 1000mm(W) |
|
Max Platform Height |
10m |
|
Speed |
60mm/s |
|
Load capacity |
150KG~350KG |
|
Operate voltage |
24V |
|
Power Output |
2.2KW |
|
Power Input |
220V/50HZ (or customized for local power supply) |
|
Drive System |
Hydraulic |
|
Control Mode |
Inching Switch or Automatic |
|
Drive Control |
Self-resetting system |
|
Overload |
Protection Over current relay |
|
Material of Platform |
Checkered slip-proof aluminum alloy |
|
Painting |
Plastic electrostatic spraying |
|
Working Condition |
Both indoors and outdoors |
|
Working temperature |
From -10°~60°C |
|
Safety:
1. Control Device:Calling box (installed on the wall nearby) and remote controller(Extra optional)
2.Emergency Stop:The lifting and lowering process can be stopped immediately by
pressing the emergency button.
3. Safety Interlock: Lock the platform when it is out of control
4. Emergency lowering:The platform can be lowered by opening hydraulic valve manually or rolling screw rod.
5. The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity.
6. The machine equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position.
Service:
We also supply spare parts and supply technical supporting all the time. (Spare parts: control button, travel switch, Oil cylinder seals and the wrench etc.)
Factory Workshop
hydraulic elevator lift is mainly used to lift workers to high place for repairs, maintenance, cleaning or installation and so on. You can move it easily to the right working area.electric wheelchair lift elevator hydraulic stair climbing wheelchair lift can be also equipped with battery. With the battery, you don’t need to connect AC power, and you can let the mobile scissor lift at some work areas without power. Also, hydraulic elevator lift this type of mobile lift can be installed with the driven wheel to move it by hands without any hardness.
JHBJHB
electric wheelchair lift elevator hydraulic stair climbing wheelchair lift are the industry solution for increasing worksite productivity. Ideal for maneuvering in tight spaces, they’re excellent for indoor and outdoor construction, maintenance and installation applications with high level surfaces. Characterized by low noise levels, hydraulic elevator lift provide excellent capacity and large platform workspace.
SFDSSSSS
hydraulic elevator lift is a type of platform that can usually only move vertically. The mechanism to achieve this is the use of linked, folding supports in a criss-cross "X" pattern, known as a pantograph (or scissor mechanism). electric wheelchair lift elevator hydraulic stair climbing wheelchair lift The upward motion is achieved by the application of pressure to the outside of the lowest set of supports, elongating the crossing pattern, and propelling the work platform vertically.