1.Model ES30T-D ES30T-DA ES30T-DB
2.Standard equipment
- Proportional controls
- Self-lock gate on platfor
- Drivable at full height
- Non marking treys
- 2WD
- Automatic brakes
- Emergency lowering system
- Emergency stop buttons
- Cylinder holding valve
- Horn
- Hour meter
- Safety brackets
- Forklift pockets
- Charger protection
- Flashing beacon
3.Options
- Double extended platform
- Single extended platform
Self-Propelled work platform ES30T-D ES30T-DA ES30T-DB | |||
S.W.L (kg) |
240 |
Lifting motor |
24VDC/0.8kw |
Working Height(m) |
5.00 |
Travel Speed (Stowed) |
4Km/h |
Platform floor height (m) |
3.00 |
Travel Speed (Raised) |
0.8Km/h |
Overall Length (m) |
1.18 |
Up/Down Speed |
28/41 sec |
Overall Width (m) |
0.76 |
Batteries (V/Ah) |
2*12V/95Ah |
Overall Height (m) |
1.82 |
Integrated Charger(V/A) |
24V/12A |
Platform Size (m) |
1.17*0.60 |
Gradeability |
25% |
|
Ground Clearance (m) |
0.06 |
Max.Working Slope |
2 |
Wheelbase (m) |
0.99 |
Driving Wheels (mm) |
Φ230*80 |
Turning Radius |
0 |
Front Wheels (in) |
6 |
Drive motors (V/kw) |
2*24VDC0.4kw |
Weight (kg) |
495 |
hydraulic elevator lift is mainly used to lift workers to high place for repairs, maintenance, cleaning or installation and so on. You can move it easily to the right working area.Self-Propelled elevated work platform ES30T series can be also equipped with battery. With the battery, you don’t need to connect AC power, and you can let the mobile scissor lift at some work areas without power. Also, hydraulic elevator lift this type of mobile lift can be installed with the driven wheel to move it by hands without any hardness.
JHBJHB
Self-Propelled elevated work platform ES30T series are the industry solution for increasing worksite productivity. Ideal for maneuvering in tight spaces, they’re excellent for indoor and outdoor construction, maintenance and installation applications with high level surfaces. Characterized by low noise levels, hydraulic elevator lift provide excellent capacity and large platform workspace.
SFDSSSSS
hydraulic elevator lift is a type of platform that can usually only move vertically. The mechanism to achieve this is the use of linked, folding supports in a criss-cross "X" pattern, known as a pantograph (or scissor mechanism). Self-Propelled elevated work platform ES30T series The upward motion is achieved by the application of pressure to the outside of the lowest set of supports, elongating the crossing pattern, and propelling the work platform vertically.